Is There a Front Hitch Receiver for the Ford Maverick?

· 2 min read

Illustration comparing Maverick front tow equipment and a rear hitch receiver

THE COMMON MAVERICK RECEIVER KITS MOUNT AT THE REAR

Last verified 8 November 2026

Ford NZ6Z17D826C and CURT 13504 are rear two-inch receivers. Blue Ox BX2917 is a front-mounted flat-tow baseplate for the 2025–2026 Maverick Hybrid. A front cargo or winch receiver needs its own published fit, load rating and installation instructions for the truck.

Fit Assistant · For your setup

Apply this to your Maverick

Use your truck and what you need from this decision.

JobFirst route to compare
Carry bikesA documented rear receiver and rack combination, or an in-bed mount
Keep the tailgate accessibleA rack with documented tilt or swing clearance for the exact setup
Move a trailer in a tight areaA compatible trailer-positioning device or a different maneuvering arrangement
Evaluate a claimed front receiverExact vehicle application, attachment, allowed loads and fascia and sensor fit

A flat-tow baseplate is built around towing an eligible truck behind a coach. Its attachment and purpose differ from a receiver for a bike rack or trailer. Give the supplier the actual accessory and the job you need it to do. Compare Maverick hitch bike-rack clearance if bed access is the reason you were shopping at the front.

Compatibility snapshot

SetupVerdictRequired check and source
Ford NZ6Z17D826C or CURT 13504Rear mountUse the published application and check vehicle loading limits separately from the receiver rating. Ford Maverick two-inch trailer hitch receiver CURT 13504 receiver
Blue Ox BX2917Front flat-tow baseplateListed for 2025–2026 Hybrid. Use with the specified flat-tow hardware. Blue Ox BX2917
Front cargo or winch receiverVerify exact systemAsk for the Maverick application, mounting instructions and rated loads before purchasing. Ford Maverick two-inch trailer hitch receiver CURT 13504 receiver Blue Ox BX2917

Sources & notes

Last verified 8 November 2026.