Which Ford Maverick Door Sill Protectors Clear the Seals?

· 2 min read

Technical illustration of a door sill protector and the nearby seal

CHECK PLACEMENT BEFORE PEELING THE ADHESIVE

Last verified 8 November 2026

Compare the Ford-licensed Putco VNZ6Z-99132A08-A four-piece plate for a stainless trim style and Tufskinz MAV025 for a textured overlay. Before exposing the adhesive, check where the edge meets the factory sill and weatherstrip. The vehicle listing gives the intended application. Existing protectors or raised trim can change the available clearance.

Fit Assistant · For your setup

Apply this to your Maverick

Use your truck and what you need from this decision.

Which sill protection should you choose?

GoalProduct to compareConfirm on your truck
Protect the painted entry area with a finished metal plateFord-licensed Putco four-piece VNZ6Z-99132A08-AThe correct front and rear locations, exact finish and existing trim
Add texture at the entry areaTufskinz MAV025Exact outline and whether the adhesive stays on the intended surface
Repair chipped paint, loose factory trim or corrosionPaint or trim repair firstDamage under the accessory and the condition of the attachment surface
Protect a sill that already has an overlayReview the existing installation with the supplierA supported replacement rather than stacking another layer

Check the manufacturer drawings before positioning the product. Keep the adhesive backing intact and compare the part with the shown installation area. Ensure the part does not overlap the seal or an existing edge. Remove any loose piece from the doorway before closing it. Follow the supplied preparation and application instructions.

After fitting, gently verify that the door closes normally and that the seal has no new folds or interference. Stop and have the placement checked if it changes the way the door closes. If the goal is repairing an existing paint chip, see the Maverick touch-up paint guide.

Compatibility snapshot

SetupVerdictRequired check and source
Stock sill and Putco VNZ6Z-99132A08-AListed four-piece plate routeDry-fit the exact front or rear piece before peeling tape. Ford-licensed Putco sill kit instructions
Stock sill and Tufskinz MAV025Listed textured adhesive overlayConfirm year, actual mounting surface and seal clearance. Tufskinz MAV025 textured door sill overlays
Existing protector or raised trimVerify before stacking productsCheck mounting surface and door closure and follow the maker’s installation method. Ford-licensed Putco sill kit instructions Tufskinz MAV025 textured door sill overlays

Sources & notes

Last verified 8 November 2026.