Bed racks & covers

Does a Yakima OverHaul HD Fit a Ford Maverick With Retrax XR?

· 3 min read

Does a Yakima OverHaul HD Fit a Ford Maverick With Retrax XR

YES—WITH RETRAX XR TRACKS AND TONNEAU KIT 1

High confidence in the named interface · Last verified 26 Oct 2026

Yakima OverHaul HD and OutPost HD can mount to a Maverick's Retrax XR cover when you use Tonneau Kit 1 `8001155` and the cover is the exact XR application for your model year. The adapter is not approved for Retrax MX covers without accessory tracks. A 2022 Maverick package using OverHaul `Y01151-5755` and RetraxONE XR `RTX83QR` is explicitly merchant-confirmed.

The important word is `XR`. Retrax XR covers add accessory T-slots to the cover rails. Yakima's adapter uses those tracks to connect the OverHaul HD or lower OutPost HD rack. A Retrax cover that fits the truck but lacks XR tracks does not provide the same interface.

Documented parts

PartRolePublished evidenceVerdict
Yakima Tonneau Kit 1 `8001155`Track adapterNames Retrax XR, OverHaul HD and OutPost HDRequired interface
OverHaul HD package `Y01151-5755`Adjustable-height rack with 60-inch bars and adaptersMerchant-confirmed on 2022 MaverickDocumented 2022 package
RetraxONE XR `RTX83QR`Maverick retractable cover with accessory T-slotsMerchant-confirmed with the package aboveDocumented 2022 cover
OutPost HD package `Y01152-5755`Fixed mid-height rack with adaptersMerchant lists 2022 Maverick and named coversDocumented 2022 alternative

Review Yakima Tonneau Kit 1 and the exact 2022 Maverick combination.

OverHaul HD or OutPost HD?

Choose by cargo height and adjustability, not by a different tonneau adapter.

  • OverHaul HD: adjustable uprights are useful when you need low loading height on one trip and cab or roof clearance on another.
  • OutPost HD: fixed 13-inch uprights create a lower, simpler platform for gear that does not need cab-height clearance.

Both use the same named Tonneau Kit 1 interface. Confirm current crossbar length, upright position and cargo attachment requirements for the exact package you buy.

Model-year boundary

Yakima's adapter documentation proves compatibility with the Retrax XR track family; it is not a Maverick cover-fitment catalog. etrailer's cited combination is exact for a 2022 Maverick. RealTruck currently lists Retrax XR products in Maverick vehicle catalogs through 2026, but the SKU can change by cover version or year.

For a 2023–2026 truck, select the truck first on the current Retrax or retailer page and record the resulting cover SKU. Then verify that it is an XR rail, not an MX rail, before ordering the Yakima kit. Do not extend `RTX83QR` to later years just because the bed length looks unchanged.

Load limits

Yakima publishes these limits for Tonneau Kit 1:

  • 300 lb on-road;
  • 180 lb off-road; and
  • 800 lb static.

These are maximum adapter-system numbers under the stated conditions, not guaranteed Maverick payload. Use the lowest applicable limit among the rack, adapter, cover rails, Ford payload label, cargo mounts and installation instructions. The static figure applies while parked; it is not a driving rating.

For bikes, kayaks or a rooftop tent, include the crossbars, carriers and mounting hardware in the load calculation. A tent also needs explicit rack and tent-maker approval, not just a sufficient static number.

Cover operation and clearance

Retrax XR retracts into a canister at the front of the bed, so there are no folding panels to swing through the rack uprights. That does not eliminate every clearance check.

Before tightening the rack:

  1. Run the cover through its full travel.
  2. Keep upright hardware clear of the handle, locks and drain paths.
  3. Confirm the front uprights and cargo do not block the canister opening.
  4. Check cab, antenna and tailgate clearance at the chosen rack height.
  5. Re-torque the adapter and rack hardware on the published schedule.

Common wrong purchases

  • RetraxONE MX or RetraxPRO MX instead of an XR model.
  • A generic T-bolt kit instead of Yakima `8001155`.
  • A standard BedGrip-only Yakima package without the tonneau adapters.
  • Assuming the 800-lb static limit permits 800 lb while driving.
  • Reusing the 2022 cover SKU for a later model year without rechecking.

Bottom line

Yes: a Maverick with the correct Retrax XR cover has a documented Yakima OverHaul HD/OutPost HD path through Tonneau Kit 1 `8001155`. The exact 2022 OverHaul and RetraxONE XR combination is directly confirmed. For later trucks, reselect the exact Maverick XR cover SKU and keep the adapter, clearance and lowest-system-load checks intact.

For alternatives, see which Maverick bed racks work with tonneau covers.

Sources & notes