Bed racks & covers

Does Dee Zee DZ43207 Fit the Ford Maverick Tailgate?

· 1 min read

Does Dee Zee DZ43207 Fit the Ford Maverick Tailgate

YES—DZ43207 IS THE MAVERICK-SPECIFIC DRIVER-SIDE KIT

High confidence for 2022–2026 application · Last verified 26 Oct 2026

Dee Zee DZ43207 is listed for 2022–2026 Mavericks and installs on the driver's side only. Follow the supplied expansion-fastener sequence exactly; spinning or pulling the insert out of position prevents it from locking inside the tailgate.

Stop and reset the hardware rather than forcing a loose insert.

The kit reuses the driver-side cable mounting area and adds a lower ball mount inside the tailgate. Hold outward tension on the lower fastener while turning it as the instructions show so the internal feature seats instead of rotating freely. Do not substitute an impact tool for the controlled hand procedure.

Ford sells its own Maverick tailgate assist for 2022–2026 and notes that adding the feature removes use of the affected tailgate tie-down bracket. That tradeoff should be accepted before purchase, especially when the bracket is used as a bottle opener or cargo point.

After installation, lower the tailgate by hand for the first cycles. Verify that the factory cable, shock and brackets do not rub and that every fastener remains seated.

Compatibility snapshot

Decision pointWhat this guide establishes
VerdictYES—DZ43207 IS THE MAVERICK-SPECIFIC DRIVER-SIDE KIT
Confidence and scopeHigh confidence for 2022–2026 application · Last verified 26 Oct 2026
Before purchaseStop and reset the hardware rather than forcing a loose insert.

Bottom line

DZ43207 is the correct Dee Zee application. Most fit trouble is installation-state trouble at the lower fastener, not evidence that a universal strut should be substituted.

For another bed racks & covers decision, see Which Hard Tonneau Cover Fits a 2025 Ford Maverick Lobo?.

Sources & notes