Bed racks & covers

BAKFlip MX4 vs UnderCover Ultra Flex for Your Maverick

· 5 min read

Ford Maverick bed with two hard-folding tonneau cover designs shown in a technical comparison

Which BAKFlip MX4 Version Should a Maverick Buyer Order

Last verified 8 November 2026

RealTruck lists BAKFlip MX4 Gen 3 448324 and MX4 TS Gen 3 449324TS for the Maverick. The TS adds integrated accessory tracks. RealTruck also sells an MX4 EZ-Lift family, but the reviewed family page did not identify an exact Maverick EZ-Lift kit. Get the SKU and truck application in writing before paying for lift assistance.

Fit Assistant · For your setup

Apply this to your cover choice

Tell us a little about your situation. Fit Assistant will help you apply this guide.

What changed from older comparisons?

RealTruck’s current pages identify both products as Gen 3. An old review, used cover or warehouse listing can describe an earlier version even when the familiar MX4 or Ultra Flex name remains.

The practical correction is twofold: UltraFlex now has a directly documented Maverick SKU, and its current underside description is a soft-impact surface. Do not assume an older carpeted underside or lighting package is included in the current box. Ask the seller which generation, contents and instructions they are supplying.

Compare the current Maverick applications

ItemBAKFlip MX4 Gen 3UltraFlex Gen 3
Reviewed part448324UX22032
Published application2022–2026 Maverick, listed 4'4 bed2022–2026 Maverick, listed 4'4 bed
Displayed price at review$1,299.99$1,199.99
Surface/constructionTextured black aluminum panels with high-density coreMatte black aluminum surface with high-density polymer core
OpeningFolds toward the cab; upright position uses securing hardwareFolds toward the cab; secure in the maker’s open position
Distinctive current detailPublished cab-protection bumpersPublished soft-impact padded underside
Published load figure400 lb evenly distributedUp to 400 lb evenly distributed
Published limited warrantyFive years, subject to termsFive years, subject to terms

Sources: the exact MX4 448324 page and UltraFlex UX22032 page, reviewed 7 November 2026. Prices can change. A distributed panel rating is not approval for a rack, rooftop tent, concentrated load or increased truck payload.

Does the $100 difference decide it?

At the displayed prices above, UltraFlex is $100 less before tax, shipping, installation and any promotions. Use that as a dated comparison, not a permanent price hierarchy.

If both covers suit your cargo, ask what the MX4’s quoted premium buys you. Conversely, the UltraFlex’s padded underside may matter if you often move items near the cover, but it is not a substitute for securing cargo. Avoid paying for a feature that appears only in an older review.

Worked decision: if a seller quotes an earlier-generation discounted MX4, compare that exact cover against the supplied UltraFlex revision. The table’s current Gen 3 descriptions cannot certify what is inside the discounted box. Get the revision and return terms on the order.

How much bed can you use when open?

Both current pages describe full-bed access by folding and securing the cover near the cab. That describes an operating position, not zero physical space around the hinges, rails and folded panels.

For furniture, bicycles or a tall load, identify where its tallest section will sit. Check the upright stack and securing hardware, then the opening width between the actual rails. Ask for a demonstration or application-specific drawing if that space decides the purchase. Do not rely on the phrase “100 percent access” to answer a cargo-dimension question.

Follow the current instructions for securing the folded cover before driving. A panel resting open during loading is not automatically an approved travel position.

What if you want a rack later?

Neither standard cover in this comparison establishes a rack mounting system. Sharing the bed rail with a cover does not make a rack compatible.

If a rack is likely, compare a documented T-slot cover/rack system before committing to standard rails. Check both rail attachment and panel travel: a rack may mount yet prevent the cover from reaching its intended open position. Your current cover quote should name any approved rack arrangement rather than promise that “most racks work.”

Start with Maverick tonneau cover types if the rack plan changes the kind of cover you need.

What should the installed quote include?

CheckWhat to request
Product identityBrand, exact part, generation and box contents
TruckYear, bed and liner/accessory setup
InstallationCurrent rail/clamp instructions, required routing and any added work
Cargo useClosed clearance and secured open position
Purchase termsComplete price, return conditions and warranty support

Both pages describe revised mounting systems. “No drilling on most applications” is not a Maverick-specific instruction for every liner or accessory combination. Check the actual kit instructions and installation scope.

Additional fitment checks

Product/applicationVehicle fitmentResultRequired check
MX4 Gen 3 4483242022–2026 Maverick, listed 4'4 bedDocumented applicationSupplied generation and accessories · MX4 448324 page
UltraFlex Gen 3 UX22032Same published Maverick rangeDocumented applicationCurrent contents and instructions · UltraFlex UX22032 page
Standard cover plus third-party rackMixed mounting arrangementUnknown until approvedAttachment, panel sweep and load conditions · MX4 448324 page · UltraFlex UX22032 page

Which should you choose?

When both fit the use case, compare the actual current quote, underside preference and demonstrated opening. The useful next step is a choice between two documented products—not rejecting UltraFlex for a missing application that is now available. Fit Assistant can help apply those trade-offs to your cargo and rack plans.

Browse Maverick Guides and bed racks and covers.

Which MX4 version is in the quote?

Compare the seller’s label and manufacturer listing side by side. A quote for 448324 buys the standard Gen 3 design. A quote for 449324TS buys the TS version with integrated accessory tracks. If the listing says EZ-Lift, ask for the complete part number and the manufacturer’s confirmation that it fits your year and bed. Do the same for used or clearance stock before relying on a feature described in a newer review.

Check what you will do with the tracks

If your goal is a rack, check its exact feet and cover operation. RealTruck marks loss of some cover functionality with the MX4 TS and Elevate Base. Its adjustable Elevate Truck Rack is a separate chart entry. The existing Ultra Flex comparison below is still useful when the goal is a straightforward hard-folding cover.

Compatibility snapshot

Offered coverVerified positionBuying check
MX4 Gen 3 448324Named Maverick standard hard foldCheck the exact selected year and what ships. RealTruck Maverick MX4 Gen 3 448324
MX4 TS Gen 3 449324TSNamed Maverick hard fold with accessory tracksVerify the rack and the full opening cycle. RealTruck Maverick MX4 TS Gen 3 449324TS RealTruck Elevate compatibility chart
MX4 EZ-Lift label aloneMaverick application needs confirmationAsk for a Maverick-specific part number and manufacturer lookup. RealTruck MX4 EZ-Lift product family

Sources & notes

Last verified 8 November 2026.

Reviewed 7 November 2026. This is a manufacturer-document comparison, not our leak, theft, impact or installation test. Archived carpet/light descriptions are not carried forward as current Gen 3 inclusions. Confirm the exact supplied product and terms before ordering.