F-150 Leveling Kits for Stock Wheels and Larger Tires

· 2 min read

Illustration of a pickup wheel arch with unbranded front suspension parts

Use the exact leveling kit and wheel specs to check tire clearance

Last verified 9 November 2026

Choose ReadyLIFT 66-2120 for a documented 2-inch front level on an eligible 2021–2026 F-150. Shop Bilstein B8 6112 by exact application if you also want new front dampers and matched springs. If you plan to keep your wheels, use their stamped size and offset when checking tires. A kit’s advertised height alone cannot establish clearance.

Fit Assistant · For your setup

Apply this to your F-150

Use your truck and the decision you are making.

Ask for an installed quote

Record unloaded front and rear hub-to-fender measurements on level ground. Tell the installer what the truck normally carries and whether you still want some rear-high rake when empty. Ask the shop to include alignment, any kit-required hardware and clearance checks at steering lock with the tires you intend to buy.

If you are keeping the current tires, a stance change and a tire upgrade can be priced separately. If the new tires are the reason for the level, check the tire and wheel pair before ordering the kit.

Compatibility snapshot

GoalDocumented starting pointWhat still changes the outcome
Change stance on an eligible truckReadyLIFT 66-2120 spacer levelReadyLIFT excludes Tremor and a starting hub-to-fender height greater than 22.5 inches. ReadyLIFT 66-2120
Replace dampers while setting heightBilstein B8 6112 familyConfirm the exact application and its selectable settings. Bilstein’s F-150 example describes matched springs and adjustable spring seats. Bilstein F-150 leveling overview
Keep the factory wheels and fit bigger tiresCheck the factory wheel stamps and the intended tire dimensionsReadyLIFT's 295/60R20 example uses a 20×9 +18 mm wheel. A stock wheel that differs needs its own clearance check. ReadyLIFT 66-2120 ReadyLIFT tire sizing chart

Browse more F-150 guides.

Sources & notes

Last verified 9 November 2026.

See our methodology.