F-150 Tire Sizes on Stock and Leveled Suspension

· 2 min read

Illustration of two pickup front wheel wells with different tire sizes and ride heights

Use the stock placard or the exact leveled wheel-and-tire pairing

Last verified 9 November 2026

Use the door-jamb tire placard as the starting point on a stock F-150. On an eligible 2021–2026 truck, ReadyLIFT lists up to 295/60R20 on a 20×9 wheel with +18 mm offset for its 66-2120 level. That pairing does not establish clearance with a different wheel, a Tremor or a truck outside the kit’s starting-height limit.

Fit Assistant · For your setup

Apply this to your F-150

Use your truck and the decision you are making.

Compare the real tire, then check clearance

A 295/60R20 is about 33.9 inches in nominal diameter from the size code. Two tires with that code may have different published dimensions. Use the tire maker’s overall diameter and section width on its stated measuring rim. Compare those with the installed tire, and check the selected tire’s load rating against your truck’s requirements.

Ask the installer to check inner and outer clearance at full steering lock in both directions and through suspension travel. Also confirm what will fit in the spare location and whether the new diameter requires calibration. If you're buying wheels too, start with the F-150 wheel and lug-pattern check.

Compatibility snapshot

Truck setupSourced decisionEvidence
Stock F-150Start with its placard. Ford Canada lists 275/65R18 for a 2026 XLT 4×4. Confirm what the U.S. truck actually has.Ford XLT model page
Eligible 2021–2026 F-150 with 66-2120The maker documents 295/60R20 on a 20×9 +18 mm wheel. It excludes Tremor and trucks measuring above 22.5 inches from hub center to fender lip before installation.ReadyLIFT 66-2120
Same tire with another wheel or liftUse the chart for the specific wheel and kit. A different offset or width can change clearance on both sides.ReadyLIFT tire and wheel chart

Browse more F-150 guides.

Sources & notes

Last verified 9 November 2026.

See our methodology.