Can 35-Inch Tires Fit a Silverado Trail Boss?
A 35-INCH-CLASS OPTION FOR A SPECIFIC TRAIL BOSS SETUP
For an eligible Silverado 1500 Trail Boss with ReadyLIFT’s 1.75-inch front kit 66-3921, the listed maximum is 295/65R20 on a 20×9 wheel with zero offset. Nitto’s Ridge Grappler in that size measures 35.12 inches in its catalog. The wider 35×12.50R20 needs a separate clearance check. The factory Trail Boss suspension alone does not establish either fit.
Fit Assistant · For your setup
Apply this to your Silverado 1500
Use your truck and the decision you are making.
Which 35 would you test on a 20×9 wheel?
Suppose you own a 2022 Chevrolet Silverado 1500 Trail Boss 4WD. Your installer has confirmed ReadyLIFT 66-3921 on the factory-lifted truck, with 20×9, 0 mm offset wheels and no other added lift. Two quotes offer Nitto Ridge Grapplers. Both tires accept a 9-inch rim. Only one matches the size ReadyLIFT lists for this Chevy. ReadyLIFT application and tire notes · ReadyLIFT 66-3921 instructions, p. 3
| Ridge Grappler on the quote | Catalog diameter × width | Nitto’s approved rim widths | Decision for this truck |
|---|---|---|---|
| 217230, LT295/65R20 E 129/126Q | 35.12 × 11.77 in, measured on an 8.5-in rim | 8.5–10.5 in | Test this one first. It matches the kit maker’s named size and the proposed 9-in wheel is within Nitto’s range. |
| 217040, 35×12.50R20LT F 125Q | 34.76 × 12.52 in, measured on a 10-in rim | 8.5–11 in | Hold the four-tire order. This tire is shorter in Nitto’s table, but its wider size falls outside ReadyLIFT’s example. Ask for an actual clearance check if you prefer it. |
Nitto measured these tires on different rim widths. Subtracting the two catalog widths will not tell you how much clearance you would lose on the same 9-inch wheel. ReadyLIFT says it developed this kit using a 33×11 tire, lists 295/65R20 as the Chevy maximum, and cautions that wider tires may need different offset or trimming. That makes 217230 a sensible first test fit, even when a seller promises either “35” will work. Nitto Ridge Grappler sizing table, 20-inch rows · ReadyLIFT development size and limits, p. 3
What if you want to keep your factory 18-inch wheels?
The same ReadyLIFT listing gives a different Trail Boss example for factory wheels: 285/75R18 with wheel spacers. It does not specify the spacer thickness there. If you want your original 18s without spacers, hold the tire purchase. The published example cannot establish clearance in that configuration, and neither of the two 20-inch tires above mounts on an 18-inch wheel. If keeping the wheels is the priority, bring the wheel markings and current tire size to the installer for a no-spacer trial or keep the current fitment. ReadyLIFT factory-wheel note
If the truck still has its factory suspension alone or has a different aftermarket kit, start with that setup’s own documentation. Kit 66-3921’s instructions rule out pairing it with aftermarket lift struts or another lift system. Its GMC AT4 maximum also differs from the Chevy figure, and the kit listing excludes the Silverado ZR2 and Sierra AT4X. ReadyLIFT instructions, p. 3 · ReadyLIFT vehicle exclusions
What should the shop verify before you buy four?
Have the installer identify the tire stock number, confirm its load rating for the truck, and test one actual assembly with the intended offset and alignment. Check clearance to the upper control arm, the liner and body at both steering locks and through suspension compression with the truck’s expected load. A driveway photo with the wheels straight cannot settle that. If contact occurs and you want to avoid trimming, decline that combination. ReadyLIFT tire fitment notes · ReadyLIFT final checks, p. 11
Plan for a flat tire as well. If you want a matching spare, have the shop check that size against the carrier and surrounding clearances. If you retain the original spare, ReadyLIFT’s instructions for this kit limit its emergency use to short distances and 45 mph maximum. Follow any lower limit in the truck or tire instructions. ReadyLIFT stock-spare instructions, p. 3
Compatibility snapshot
| Your configuration | Purchase decision |
|---|---|
| Eligible Trail Boss, 66-3921, 20×9 at 0 mm, LT295/65R20 Ridge Grappler 217230 | Quote one test fit for the documented size. Confirm clearance and load requirements before buying the set. |
| Same truck and wheels, 35×12.50R20LT 217040 | Rim width passes. Vehicle clearance is unconfirmed. |
| Original 18-inch wheels with no spacers, or an unmodified factory Trail Boss | Hold the 35-inch purchase. The kit maker’s published setups differ from yours. |
If your choice is between two metric 20-inch sizes, see the Trail Boss 275/65R20 and 295/65R20 comparison. Browse Silverado 1500 guides for other configurations.
Sources & notes
- ReadyLIFT 66-3921 product application and kit instructions, checked November 19, 2026. The maximum applies to the named kit, truck and wheel. The purchase scenario uses an illustrative 2022 truck.
- Nitto Ridge Grappler specifications, checked November 19, 2026 for stock numbers 217230 and 217040. The table gives Nitto’s inflated catalog dimensions on the stated measuring rims.
See our methodology.