Which Shocks Fit Your Silverado 1500 Suspension?
Identify the damper system and axle before buying
Bilstein lists 24-293471 for specified standard Silverado 1500 rear setups and 24-309516 for specified Trail Boss rear applications. A ZR2’s DSSV dampers or an electronically controlled suspension need their own supported parts. Identify the original system, axle and actual ride height before buying an OE replacement or passive upgrade.
Fit Assistant · For your setup
Apply this to your Chevrolet Silverado 1500
Use your truck and the decision you are making.
Check the existing damper before comparing upgrades
Read the original part and check whether it has a connector or other control hardware. If you want to retain electronic control, ask for a compatible service part. If a supplier proposes a passive conversion, ask which functions it supports and what additional hardware or calibration is required. For a complete spring and damper upgrade, use the Silverado coilover guide. Bilstein 24-293471 Chevrolet Silverado ZR2 Bilstein 24-337052
Compatibility snapshot
| Setup | Documented starting point | Check before buying |
|---|---|---|
| Listed standard rear suspension | Bilstein 24-293471 candidate | Verify trim and height. Bilstein 24-293471 |
| Listed Trail Boss rear setup | Bilstein 24-309516 candidate | Use the correct factory-lift application. Bilstein 24-309516 |
| ZR2 DSSV or original electronic control | Use the exact documented system or supported conversion | Confirm damper type and retained functions. Chevrolet Silverado ZR2 Bilstein 24-337052 |
Browse more Chevrolet Silverado 1500 guides.
Sources & notes
Last verified 9 November 2026.
- Lists specified standard rear applications and exclusions Bilstein 24-293471.
- Lists specified Trail Boss rear applications and height ranges Bilstein 24-309516.
- Identifies the ZR2’s distinct DSSV system Chevrolet Silverado ZR2.
- Shows front applications with specific exclusions for Active Ride Control Bilstein 24-337052.
See our methodology.