Which Hitch Extension Fits a Silverado 1500 Safely?
Use the lowest documented limit and verify the clearance gained
CURT 45791 is an eight-inch extender with a two-inch shank and a 3,500-pound gross trailer rating. Check the extension’s vertical limit and any reduced receiver rating before using it on your Silverado 1500. Verify the actual load, shank fit and gate clearance. Use the lowest documented limit in the combination.
Fit Assistant · For your setup
Apply this to your Chevrolet Silverado 1500
Use your truck and the decision you are making.
Work the two ratings separately
For example, if a receiver permits 500 pounds of vertical load and the applicable instructions reduce it by 25 percent, that gives 375 pounds before any lower extension or accessory limit. Use the actual instructions for your combination. Include the carrier and cargo. See the Silverado Multi-Flex clearance guide for the gate motion check. CURT 45791 receiver extender CURT hitch extender guide
Compatibility snapshot
| Setup | Documented starting point | Check before buying |
|---|---|---|
| Compatible two-inch receiver needing eight inches of extension | CURT 45791 candidate | Verify intended use and lowest gross and vertical limits. CURT 45791 receiver extender CURT hitch extender guide |
| Extension selected only to clear a gate or rack | Clearance alone does not resolve capacity | Verify the loaded combination before buying. CURT hitch extender guide |
Browse more Chevrolet Silverado 1500 guides.
Sources & notes
Last verified 9 November 2026.
- Documents the extender dimensions and component limits CURT 45791 receiver extender.
- Describes receiver load reduction and the lowest-rated component rule CURT hitch extender guide.
See our methodology.