Silverado 1500 Drawers vs Sliding Bed Trays

· 2 min read

Illustration of a truck bed beside a drawer unit and a shallow cargo tray

Choose drawers for small gear or a slide for bulky cases

Last verified 9 November 2026

On a Silverado 1500, choose drawers for smaller gear you want to reach under a load floor. Choose a sliding tray when you need to pull bulky cases to the tailgate. DECKED lists XG6 for the current-generation short-bed application in its instructions. Check the exact system height, your tallest item and access to the tie-downs before ordering.

Fit Assistant · For your setup

Apply this to your Silverado 1500

Use your truck and the decision you are making.

Use a bin you already own

Take the bin’s width and height and measure the opening under the cover. Compare that with the available space after the drawer floor or tray is installed. If the lid has to open in place, include its swing. When looking at a tray, check how far out it moves and whether you can release it from your normal loading position.

For scale, DECKED’s full-size short-bed example is 12.2 inches high and about 208 pounds. Use the specifications for the exact configuration you order. DECKED technical specs

Check which original tie-downs remain accessible and which anchor points the storage kit provides. Verify the weight of the fitted system and include it in the truck’s payload worksheet. See Silverado payload after accessories.

Compatibility snapshot

ExampleUseful whenWhat to verify
DECKED XG6 short-bed instructionsYou need organized drawers below a load floorConfirm the exact 1500 short-box kit, system height and drawer travel. DECKED instructions DECKED technical specs
BEDSLIDE 10-6548-CLSA 65 × 48-inch tray suits your cargoVerify exact approved fit, mounting and the clearance needed to slide out. BEDSLIDE 10-6548-CLS
Storage under a coverYou need the bed closed while loadedMeasure the opening and available height after installation. DECKED technical specs BEDSLIDE 10-6548-CLS

Browse more Silverado 1500 guides.

Sources & notes

Last verified 9 November 2026.

See our methodology.