Truck Wheel Interchange by Hub and Bolt Pattern

· 2 min read

Illustration of separated pickup hubs and bare wheel mounting faces

A matching bolt pattern is only the first wheel-swap check

Last verified 9 November 2026

A Ford F-150 6×135 wheel cannot bolt directly onto the 6×139.7 Silverado 1500 example. A five-lug Ram Classic wheel also cannot bolt directly onto a six-lug new-body Ram. A matching pattern gets you to the next check. Verify the center bore, lug seat, offset, brakes and load rating for your exact receiving truck.

Fit Assistant · For your setup

Check the bed on your truck

Use your truck and the decision you are making.

Use this order when checking a donor wheel

Start with the wheel’s stamped part number and receiving truck’s exact year, trim and brake equipment. Once the pattern matches, check how the wheel centers on the hub and what lug seat it uses. Verify width, offset and tire size, then check room around the brake caliper and suspension. Compare the documented load rating and TPMS setup with the recipient truck.

A same-pattern Silverado and Ram example is worth looking up, but the table does not establish a direct swap. Use the specific F-150 wheel guide, Silverado wheel guide or Ram wheel guide for the exact part decision.

Compatibility snapshot

ComparisonWhat stops or advances the swapEvidence
Ford 6×135 versus GM 6×139.7 examplesDifferent circle. No direct interchange.Ford Performance M-1007-P2085AA GM wheel 84582669
Ram Classic 5×139.7 versus new-body Ram 6×139.7Different lug count. No direct interchange.PG Wheels Ram DS PG Wheels Ram DT
GM 6×139.7 versus Ram DT 6×139.7 examplesMatching pattern leaves brake, hub, seat and load checks open.GM wheel 84582669 PG Wheels Ram DT

Browse more F-150 guides.

Sources & notes

Last verified 9 November 2026.

See our methodology.