Ford F-150 Weight-Distribution Hitch Fit by Trailer

· 2 min read

Illustration of an F-150 receiver connected to a trailer with spring bars

Measure the loaded trailer before choosing spring bars

Last verified 9 November 2026

Ford’s 2025 F-150 towing guide calls for weight distribution above 5,000 pounds of trailer weight on the listed pickup applications. Match the loaded tongue weight and trailer frame to a hitch your receiver supports. Equal-i-zer 90-00-1000 is one candidate when the measured load, truck ratings and mounting space fall within the documented limits.

Fit Assistant · For your setup

Apply this to your Ford F-150

Use your truck and the decision you are making.

Set the height on your actual combination

Check the trailer maker’s instructions for spring-bar brackets, especially around propane trays and other hardware. With the correct shank and brackets installed, measure front fender height unhitched and then hitched without spring-bar tension. Use Ford’s target for your truck and the hitch maker’s procedure. Confirm loaded vehicle and axle weights after setup. 2025 Ford RV and trailer towing guide · Equal-i-zer 6K–14K owner manual

Compatibility snapshot

Buying decisionDocumented inputCheck before ordering
Determine if weight distribution is requiredFord's applicable towing guide and installed receiver labelVerify both weight-carrying and weight-distributing ratings. 2025 Ford F-150 towing guide
Consider Equal-i-zer 90-00-10001,000 lb maximum tongue weight and 10,000 lb maximum trailer weight for the hitchMatch actual weights and every lower limit in the system. Equal-i-zer 6K–14K owner manual
Adjust a compatible setupFord’s listed 50% front height correction for F-150 pickupFollow the exact year’s guide and the hitch instructions. 2025 Ford RV and trailer towing guide

Browse more Ford F-150 guides.

Sources & notes

Last verified 9 November 2026.

See our methodology.