Ford F-150 Swing-Out Toolbox Fit With Bed Gear

· 2 min read

Illustration of a swing-out toolbox beside an open pickup tailgate

Check the toolbox's swing and the hardware it passes

Last verified 9 November 2026

For listed 2015–2026 F-150 trucks, UnderCover SC203D is a driver-side swing-out toolbox. Choose the side by the accessories you need to keep using. Check the pivot and lid against the cover rail, tailgate and any outlet or tie-downs. If you use a cargo track or liner, compare the exact bracket positions before ordering.

Fit Assistant · For your setup

Apply this to your Ford F-150

Use your truck and the decision you are making.

Work through the opening sequence

With the tailgate lowered, mark the pivot and the farthest edge of the box when open. Compare that path with the rail and any mounting bolts. Then check lid clearance in the parked position with the cover shut. Ask how the box comes off the bracket if you need the entire bed for large cargo. Keep the accessories you actually use reachable. If the box occupies a hook, outlet cover or bed rail, check the other side or a low floor box. Verify whether a drop-in liner covers the bracket area. Follow the exact mounting instructions before altering any liner or cargo track.

Compatibility snapshot

F-150 setupCandidateFit check
Listed driver-side bedUnderCover SC203DMatch year and confirm brackets and hinge path. UnderCover SC203D
Bed with cover or linerCheck the exact SwingCase and installed hardwareInspect all clamp positions and box travel. UnderCover SC203D
Bed with outlet or factory cargo gearVerify the intended sideKeep the outlet, fasteners and cargo anchors accessible. UnderCover SC203D · Ford 2025 F-150 order guide

Browse more Ford F-150 guides.

Sources & notes

Last verified 9 November 2026.

See our methodology.