Which Bed Divider Fits an F-150 With a Tonneau Cover?

· 2 min read

Illustration of a pickup bed divider with bins forward of it

Check installed rails and divider height before ordering

Last verified 9 November 2026

Start with Ford’s FL3Z-9900092-A divider if you want separate cargo zones in a listed F-150 bed. For a removable bar, Keeper 05059 spans 40–70 inches. Ford requires BoxLink plate kit HC3Z9928408AA if the plates are missing, including replacement of H-loops on 2024-and-newer trucks. Measure cover and liner clearance before buying.

Fit Assistant · For your setup

Apply this to your Ford F-150

Use your truck and the decision you are making.

Place it where you use the cargo

Set the divider far enough from the tailgate to fit your largest tote and close the cover with nothing touching. Measure a tension bar where both pads would sit. Bed walls, ribbed liners and clamp heads can leave a different width than the floor dimension. Use the truck’s rated tie-down points and suitable straps for heavy cargo. Ford F-150 bed divider · Keeper cargo-bar documentation

Compatibility snapshot

Bed setupCandidateCheck first
Listed F-150 using the Ford dividerFL3Z-9900092-ACheck for BoxLink plates. Ford excludes concurrent use with premium locking cleats or bed ramps. Ford F-150 bed divider
Want a removable barKeeper 05059Check the 40–70-inch range at the actual contact height. Keeper cargo-bar documentation · Keeper model 05059 catalog
Tonneau, rack rail or raised liner installedCompare divider and cover togetherCheck clamp conflicts and cover travel. Ford F-150 bed divider · Keeper cargo-bar documentation

Browse more Ford F-150 guides.

Sources & notes

Last verified 9 November 2026.

See our methodology.