Which Bike Mount Fits a Chevy Colorado Bed With a Cover?
Match the bike attachment and its travel envelope
Yakima Locking BlockHead is a fixed fork-mount example for its documented bike axle and mounting surface. Before buying for a Colorado, check your axle type, attachment point and the bike’s loaded length and height. Then verify that the cover, rails and tailgate can operate in the configuration you need.
Fit Assistant · For your setup
Apply this to your Chevrolet Colorado
Use your truck and the decision you are making.
Mock up the bike before drilling or buying an adapter
Measure the fork-to-rear-wheel length with the bike secured in its planned position. Include handlebar and saddle height. Check the mount’s axle support before assuming a thru-axle fits a different fork block. For a rack above the cover, use the Colorado rack and cover guide. Yakima Locking BlockHead fork mount RealTruck Colorado RetraxPRO XR T-80455
Compatibility snapshot
| Setup | Documented starting point | Check before buying |
|---|---|---|
| Fork attachment on an approved surface | Choose the mount by axle and base hardware | Check actual bike envelope and where the front wheel goes. Yakima Locking BlockHead fork mount |
| Cover must remain usable during transport | Verify a documented cover and rack arrangement | Check rail mounts and loaded clearance before ordering. Yakima Locking BlockHead fork mount RealTruck Colorado RetraxPRO XR T-80455 |
Browse more Chevrolet Colorado guides.
Sources & notes
Last verified 9 November 2026.
- Documents the fork mount and attachment requirements Yakima Locking BlockHead fork mount.
- Identifies one cover and track configuration RealTruck Colorado RetraxPRO XR T-80455.
See our methodology.