Which Bed Rack and Tonneau Cover Work Together on a Colorado?
Match the rack's feet to the cover's rails
For a 2023–2026 Colorado short bed, RetraxPRO XR T-80455 gives you a documented T-slot cover. Yakima lists the OverHaul HD Tonneau Set for Retrax XR and sells the bars separately. RealTruck's Elevate CS 1118513 lists the Colorado through 2025. With a folding cover or factory cargo track, verify the exact rail kit and opening clearance.
Fit Assistant · For your setup
Apply this to your Chevrolet Colorado
Use your truck and the decision you are making.
Colorado fitment checker
Check a bed rack and tonneau cover together
Find a pairing by model or part number. See what fits, then apply the result to your truck.
Showing all 4 combinations.
Yakima OverHaul HD + RetraxPRO XR T-80455
Works with conditions- Truck and bed
- 2023–2026 Chevrolet Colorado · 5 ft 2 in short bed as listed by RealTruck
- Mounting path
- Yakima Tonneau Kit 1 (8001155) mounts the listed rack to Retrax XR tracks.
- Cover operation
- Check that the cover retracts fully with the feet and your cargo in place.
- Before buying
- Confirm your exact bed listing, complete mounting hardware and compatible HD bars.
Yakima OutPost HD + RetraxPRO XR T-80455
Works with conditions- Truck and bed
- 2023–2026 Chevrolet Colorado · 5 ft 2 in short bed as listed by RealTruck
- Mounting path
- Yakima Tonneau Kit 1 (8001155) mounts the listed rack to Retrax XR tracks.
- Cover operation
- Check that the cover retracts fully with the feet and your cargo in place.
- Before buying
- Confirm your exact bed listing, complete mounting hardware and compatible HD bars.
RealTruck Elevate CS 1118513 + RetraxPRO XR T-80455
Works with conditions- Truck and bed
- 2023–2025 Chevrolet Colorado · short bed
- Mounting path
- RealTruck lists Colorado through 2025 for this rack and names the integrated T-slot route.
- Cover operation
- Confirm the feet and carried gear clear the full retraction path.
- Before buying
- Verify the included track hardware and the lowest applicable load limit.
RealTruck Elevate CS 1118513 + RetraxPRO XR T-80455
Verify before buying- Truck and bed
- 2026 Chevrolet Colorado · short bed
- Mounting path
- The cover lists 2026. The published rack application reviewed here ends at 2025.
- Cover operation
- Confirm the rack fit before evaluating cover operation.
- Before buying
- Get an exact 2026 rack application and hardware confirmation before ordering.
No reviewed combination matches that search. Use the buying checklist to confirm your parts.
Download the F-150, Silverado, Ram and Colorado records (CSV)Fit Assistant · For your setup
Apply this to your Colorado
Tell Fit Assistant what you need to do with this setup. You can skip details you’re unsure of.
Start with the cover you already have
Read the cover's label and check the installed rail profile. An integrated slot runs along the top of a compatible cover rail. An accessory track inside the bed and an open stake pocket serve different mounts. If your cover sits above the rail or uses the underside of the bed lip, look at the rack foot and fasteners in the same position before buying. Where they compete for space, look for a maker-approved rail or change one component. TruXedo Elevate compatibility booklet
With the cover open, measure its highest or widest moving point. A folding panel can hit an angled upright before it reaches its open position. A retractable housing takes space near the cab. When the rack carries bikes or kayaks, compare loading height and check the cab and tailgate clearance. Use the ratings for the cover-mounted configuration and driving conditions. A generic bare-bed rack rating cannot establish the combination's load limit.
Choose the rack mount around the cover opening
Leitner separates drill, no-drill and tonneau versions of its ACS FORGED rack. If you already have RetraxPRO XR T-80455, compare the documented Yakima Tonneau Set tower and bar requirements before buying a different clamp style. Lay out the feet and measure access to the cover latch and rails with the rack in its lowest planned position. Leitner Colorado rack comparison · Yakima Tonneau Set.
Compatibility snapshot
| Colorado and cover | Rack path | Confirm before checkout |
|---|---|---|
| 2023–2026 short bed with RetraxPRO XR T-80455 | Yakima OverHaul HD Tonneau Set | Use the tonneau tower kit and compatible bars. Check the cover-mounted load limit. RetraxPRO XR T-80455 · Yakima OverHaul HD Tonneau Set |
| 2023–2025 Colorado with RetraxPRO XR | Elevate CS 1118513 | Verify the two maker applications and the included T-slot hardware. RetraxPRO XR T-80455 · RealTruck Elevate CS 1118513 |
| Inside-rail cover without slots | Compatible Elevate TS rails if listed | Check truck, cover family and factory cargo track. Do not infer fit from an exposed rail edge. TruXedo Elevate compatibility booklet |
Browse more Chevrolet Colorado guides.
Sources & notes
Last verified 9 November 2026.
- Lists a 2023–2026 Colorado short-bed cover with integrated T-slot rails RetraxPRO XR T-80455.
- Specifically lists Retrax XR and supplies the tonneau mounting hardware in this tower set. Crossbars are separate Yakima OverHaul HD Tonneau Set.
- Lists 2015–2025 Colorado and integrated T-slot compatibility. Use the current fit selector for later vehicles RealTruck Elevate CS 1118513.
- Explains integrated slots, separate TS rails and relevant factory track limitations TruXedo Elevate compatibility booklet.
- Separates drill, no-drill and tonneau mount options Leitner Colorado rack comparison.
See our methodology.