Which Bed Step Fits a Chevy Colorado Bumper and Tailgate?

· 2 min read

Illustration of a Colorado rear bumper with an extended hitch step

Choose a step you can reach with the gate in use

Last verified 9 November 2026

If your Colorado has factory bumper corner steps, try them with the tailgate open before buying anything. A Go Rhino D360T is a removable option for a compatible 2-inch receiver, provided the gate leaves enough foot clearance. If you tow or use a hitch rack, look for a step that fits your exact bumper and leaves the receiver free.

Fit Assistant · For your setup

Apply this to your Chevrolet Colorado

Use your truck and the decision you are making.

Measure with the gate where you use it

A hitch step can be easy to reach with the gate shut yet sit too far underneath it when the gate is open. Compare the hitch pin to platform distance on the step drawing with the tailgate projection on your truck. Check clearance with the spare, exhaust, and any wiring connector. For an independently mounted step, confirm the bracket and bumper application with the maker before ordering.

Choose the step position with the tailgate down

Test whether the factory corner step is reachable when the gate is open. If you need a receiver-mounted step, check the D360T's documented 2-inch receiver requirement and compare the gate sweep with the installed step. A ball mount or bike rack already in the receiver changes which step can be used. Go Rhino catalog · 2025 Chevrolet Colorado owner manual.

Compatibility snapshot

SetupStarting pointFit gate
Bumper with usable corner stepsTry the factory footholdTest your approach with the tailgate lowered. 2025 Chevrolet Colorado owner manual
Available 2-inch receiverGo Rhino D360TCheck reach, pin engagement and the accessory's instructions. Go Rhino catalog
Receiver regularly occupiedBumper-specific step or factory footholdVerify bumper and mounting hardware for the exact trim. 2025 Chevrolet Colorado owner manual

Browse more Chevrolet Colorado guides.

Sources & notes

Last verified 9 November 2026.

See our methodology.