Ram 1500 Wheel Spacers by Hub and Stud Engagement
Match the bolt pattern, hub and wheel mounting surface
The Ram 1500 DT uses a six-lug pattern in the KSP 312BK application. The Classic 4WD uses a different five-lug spacer such as Rough Country 10091 in its listed years. Verify the exact hub and wheel dimensions, stud and nut engagement and rear wheel pockets before choosing any spacer or changing offset.
Fit Assistant · For your setup
Apply this to your Ram 1500
Use your truck and the decision you are making.
Measure where the wheel actually seats
Ask the maker for required engagement, seat type and installation instructions for your exact spacer and wheel. If the vehicle studs protrude past a bolt-on spacer, verify whether the wheel has suitable rear pockets. A wheel that cannot sit flush at the mounting face is the wrong combination. Have the actual assembly inspected before use. Moving a wheel out can increase clearance on the inside and reduce it at the outer arch. If you are buying wheels anyway, compare a wheel with appropriate width and offset. Check the tire through steering and suspension movement rather than judging with the truck stationary and pointed straight ahead.
Compatibility snapshot
| Ram setup | Documented example | Fit gate |
|---|---|---|
| Listed 2019–2026 DT, six-lug hub | KSP 312BK | Match the exact hub, studs, wheel seat and rear pockets. KSP 312BK |
| Listed Classic 4WD, five-lug hub | Rough Country 10091 | Verify Classic, axle and exact application before ordering. Rough Country 10091 |
| Wheel cannot seat flush or clearance is unresolved | Choose a documented combination or a different wheel | Check the maker's instructions and have the installed clearance verified. KSP 312BK · Rough Country 10091 |
Browse more Ram 1500 guides.
Sources & notes
Last verified 9 November 2026.
- Lists a six-lug hub-centric spacer for the specified DT applications. KSP 312BK.
- Lists a five-lug spacer for applicable Ram 1500 Classic 4WD trucks. Rough Country 10091.
See our methodology.