Which Upper Control Arms Fit a Leveled Ram 1500?
Match the lift system and original knuckle before choosing an arm
Rough Country lists 31402 upper control arms for a 3- to 3.5-inch lift on specified Ram 1500 DT trucks and excludes factory air ride. Check the actual lift and original knuckle first. If you have a stock-height truck or a different lift, use the arm documented for that application.
Fit Assistant · For your setup
Apply this to your Ram 1500
Use your truck and the decision you are making.
Check what you want the new arm to solve
If the original joint is worn, find the exact service application. If a lift changed the arm angle or reduced travel, use the kit instructions and get the installed geometry checked. An arm approved for one lift range does not establish fit at another. See Ram 1500 leveling kit fit if you have not selected a lift. Rough Country 31402 upper control arms ReadyLIFT Ram 1500 upper control arms
Compatibility snapshot
| Setup | Documented starting point | Check before buying |
|---|---|---|
| Listed DT on a 3- to 3.5-inch lift without factory air | Rough Country 31402 candidate | Verify exact trim, knuckle and wheel clearance. Rough Country 31402 upper control arms |
| Stock-height, factory air or another lift | Use a separately documented arm | Match the geometry, joint and hardware for the actual setup. Rough Country 31402 upper control arms ReadyLIFT Ram 1500 upper control arms |
Browse more Ram 1500 guides.
Sources & notes
Last verified 9 November 2026.
- Lists the applicable lift range and factory air exclusion Rough Country 31402 upper control arms.
- Documents a separate arm application with its own installation conditions ReadyLIFT Ram 1500 upper control arms.
See our methodology.