Which Ram 1500 cat-back fits your engine, cab and bed?

· 2 min read

Illustration of a pickup rear underside with two separate exhaust exit layouts

Match the exact engine and tailpipe exit before choosing tone

Last verified 9 November 2026

Borla 140753 fits listed Ram 1500 DT 5.7L trucks with through-bumper exits, and excludes Classic. The 2025–2027 standard-output 3.0L Hurricane has a separate example, Borla 141031, which excludes high-output and G/T applications and comes without tips. Verify wheelbase, rear bumper exit and factory equipment before ordering, then choose the tone.

Fit Assistant · For your setup

Apply this to your Ram 1500

Use your truck and the decision you are making.

Match the pipe run and bumper first

A rear-section swap and a full cat-back replace different pieces. Check the start point, hanger positions and the number of outlets in the installation drawing. If your current bumper has no cutouts, a system designed for a through-bumper application leaves the rear routing unresolved. Check whether the kit reuses factory tips or requires matching tips separately.

For a daily driver or tow vehicle, compare an installed sound sample at steady cruise and under load before choosing a louder version. A startup clip cannot establish what you hear in the cab on a long grade. Look for the same engine and output, and compare the rest of the installed system before using a clip as a reference.

Find wheelbase and exit routing before ordering

Borla lists Quad Cab 6-foot-4, Crew Cab 5-foot-7 and Crew Cab 6-foot-4 configurations for these specific systems. The Hurricane 141031 listing gives 140.5, 144.5 and 153.5 inches respectively and specifies that tips are separate. For the Hemi 140753, match the factory through-bumper exit. Do not order by cab alone if the bed or exit is missing from a seller’s listing. Borla 141031 · Borla 140753.

Compatibility snapshot

Ram 1500 configurationDocumented optionBefore you buy
Listed 5.7L DT, through-bumper exitBorla 140753Verify the cab and wheelbase. Classic and 2025 HEMI are excluded from this application. Borla 140753
2025–2027 listed 3.0L, standard outputBorla 141031Check cab and wheelbase. High-output and G/T are excluded. Reuse the original tips or source compatible tips. Borla 141031
Classic, high-output or a different exitSeparate exact applicationMatch body, engine and pipe routing before choosing a sound family. Borla 140753 · Borla 141031 · Borla Ram application guide

Browse more Ram 1500 guides.

Sources & notes

Last verified 9 November 2026.

  • Lists the 5.7L DT through-bumper application, covers named configurations and excludes Classic and 2025 HEMI Borla 140753.
  • Lists 2025–2027 3.0L configurations, excludes high-output and G/T, and omits tips Borla 141031.
  • Separates body and engine options and describes sound families Borla Ram application guide.

See our methodology.