Which bed extender clears a RamBox, tonneau or split tailgate?

· 2 min read

Illustration of a tubular pickup bed extender over a lowered tailgate

Identify RamBox before shopping for a flip-out extender

Last verified 9 November 2026

Mopar bed extender 82215724 is for listed Ram 1500 beds without RamBox. It flips out over the lowered tailgate and can turn inward as a divider. For a RamBox or multifunction gate, verify a separately documented application. With a tonneau, measure where the hoop pivots and stores so the rail, cover and latch still work.

Fit Assistant · For your setup

Apply this to your Ram 1500

Use your truck and the decision you are making.

Choose between extending the bed and dividing it

A flip-out hoop can help contain longer cargo resting partly on the tailgate when its brackets and straps are installed as shown. An in-bed divider keeps cargo within a shorter section of the bed. If your main problem is supporting very long cargo, compare a documented receiver-mounted support with the vehicle and hitch limits. Secure the load as specified for the truck and accessory. The hoop itself does not establish the cargo rating.

Measure before you order

With the tailgate down, compare the pivot locations with your cover rails, clamps and liner. Check that the extender can swing inside and lie below the closed cover. A split or multifunction tailgate can change the latch and strap interface. Require the exact application rather than adapting a strap around an unmatched latch. Mopar bed extender 82215724 · AMP 74840 installation guide

Measure three positions before ordering

Measure across the bracket locations first. Then check the sweep as the extender pivots into the bed, and finally its reach when the gate is down. If the cover closes over it, compare the extender’s stowed height with the underside of the nearest cover rail. The AMP application identifies the kit by truck, while the Mopar application excludes RamBox. AMP 74840-00A · Mopar 82215724.

Compatibility snapshot

Ram bed and gateCandidateFit gate
Listed conventional Ram 1500 bedMopar 82215724Verify gate and tailgate-latch straps. Mopar excludes RamBox. Mopar bed extender 82215724
Listed DT aftermarket pivot kitAMP BedXTender 74840 familyCompare its exact installation drawing with the bed, gate and current cover hardware. AMP 74840 installation guide
RamBox or a different gateVerify a dedicated listingIdentify the installed features in the vehicle instructions and ask for exact hardware fit. Mopar bed extender 82215724 · 2023 Ram 1500 DT owner manual

Browse more Ram 1500 guides.

Sources & notes

Last verified 9 November 2026.

See our methodology.