Which Bed Tie-Down Cleats Fit Your Ram 1500 Rail?

· 2 min read

Adjustable cargo cleats fitted along a Ram pickup’s bed rail

Identify the rail and how the cleat locks into it

Last verified 9 November 2026

The 2025 Ram 1500 manual describes adjustable cleats that lock into detents on the factory utility rails, which are also available on some trucks without RamBox. Match your installed track and its cleat retainer before buying. A cover T-slot, fixed floor tie-down or stake-pocket ring uses a different mounting point.

Fit Assistant · For your setup

Apply this to your Ram 1500

Use your truck and the decision you are making.

Check the detent and how the cleat enters the rail

On the manual’s factory system, the cleat seats in a detent and locks with its retainer. The manual specifies up to 250 lb per cleat, 500 lb per rail and a maximum load angle of 45 degrees above horizontal. Use the documentation for the equipment installed on your truck. For top-rail rings or corner anchors, see Ram 1500 stake-pocket tie-down fit. 2025 Ram 1500 owner’s manual bed rail tie-down section Mopar 82215285AB conventional short-bed utility rail kit

Compatibility snapshot

SetupDocumented starting pointCheck before buying
Factory RamBox track with detentsVerify the factory utility rail and matching cleatCompare locking profile, retainer and the rail end. 2025 Ram 1500 owner’s manual bed rail tie-down section
Conventional bed with Mopar utility railsIdentify the installed kit and its service partsMatch the rail application, bed length and cleat by kit number. 2025 Ram 1500 owner’s manual bed rail tie-down section Mopar 82215285AB conventional short-bed utility rail kit
Aftermarket cover track or fixed mounting pointUse hardware specified for that systemCheck installation instructions and the documented load path. 2025 Ram 1500 owner’s manual bed rail tie-down section Mopar 82215285AB conventional short-bed utility rail kit

Browse more Ram 1500 guides.

Sources & notes

Last verified 9 November 2026.

See our methodology.